While we have the exact nerf bars you need, that mounting hardware will not fit the nerf bars you mentioned, as both the mounting hardware and bars need to be compatible.
Since those don't fit you should be able to return them to the place you purchased them and get the right nerf bars that I confirmed with Westin are a fit for your 2020 Ram 1500 Classic Warlock with a Quad Cab:
- Westin Platinum Series Oval Nerf Bars - 4" - Black Powder Coated Steel # 21-3555
- Westin Platinum Series... view full answer...
Yes. The K-Source Custom Flip Out Towing Mirrors - Electric/Heat w Signal, Lamp - Textured Black - Pair # KS60195-96C will fit on your 2019 Ram 1500 Classic even though your mirrors don't have the turn signals on them. These will replace your existing mirrors and use the same plug; it won't add any functions but you also won't lose the heat and power mirror adjustment function you've already got, so they're a good looking replacement.
I've linked a review video of these for you to have... view full answer...
I have a solution that will allow you to carry a kayak carrier on the 1-1/2 inch square crossbars of the Adarac Aluminum Series ladder racks. The Yakima HullyRoller Kayak Carrier part # Y04035 can be installed on crossbars up to 1-1/2 inches in height if you use the Universal MightyMounts # Y03590.
The HullyRoller allows kayaks to sit flat on the crossbars as well. view full answer...
You are correct that there are differences between the frames on the 2019 Ram 1500 and the Ram 1500 Classic. The correct Draw-Tite Class IV hitch for the 2019 Ram 1500 Classic is the Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2" # 41948. This is a custom fit hitch, so no drilling will be required during installation.
If you also need to install trailer wiring on your 2019 Ram 1500 Classic, I recommend using the Curt T-Connector Vehicle Wiring... view full answer...
The difference you will see between the standard type Timbren Axle-Less Trailer Suspension System Regular Tires part # ASR3500S06 and the Timbren Heavy-Duty Axle-Less Trailer Suspension Off-Road Tires part # ASR35HDS02 all comes down the the spindle that they use If you'll look in the provided pictures you can see that the HD version has a space behind the brake flange and the standard duty models do not. This space is the ensure you have enough room to clear the larger off road type of... view full answer...
The vehicle end gray plug on the Tekonsha Plug-In Wiring Adapter # 3024-P is not available by itself but you can still use this to install the Tekonsha Envoy Brake Controller on your 2019 Ram Classic 1500. You will just need to cut off the controller-end plug on the adapter so that you can hardware it to the pigtail on the Envoy. The wires will match up color to color.
You will then be able to plug the controller into the factory port behind the dash of your new Ram just like you did... view full answer...
No, according to Curt's fitment chart the Curt Trailer Hitch Receiver # 13333 would be the correct fit for your 2021 Ram 1500 Classic Warlock instead of the # C13419 that you referenced. I've attached a short video below where Rob will walk you through the installation process. view full answer...
I do have an option for you, but the Roadmaster dual hitch adapter # RM-077-4 should not be used for towing a trailer. This is intended for use when flat towing a vehicle only.
Instead I recommend using the Gen-Y adjustable ball mount # 325-GH-314. This thing is rated for 10,000 lbs towing or 1,500 lbs tongue weight. So more than enough for your 4K trailer, and whatever other accessory you will be using the dual hitch for. This ball mount gives you four stacked 2" receivers so it will... view full answer...
So long as your 2019 Ram 1500 Classic does NOT have the factory brake controller, then yes, you can use the Curt brake controller, and you will also need the correct wiring harness, which I've listed below for you:
- Curt Assure Trailer Brake Controller with Dynamic Screen # C49UR
- Curt Custom Wiring Adapter for Trailer Brake Controllers # C51458
The Assure is a superb option for a brake controller because it not only gives your trailer smooth braking proportional to that of your truck,... view full answer...
The Furrion Chill HE RV Air Conditioner System - Single Zone - 15,000 Btu - Black # FR23PV that you referenced uses AC power like what a home uses and not 12-volt DC power like what a battery provides. This typically gets powered by a generator like the part # 289-SUA2000i-2. Even if you converted a battery to AC power it would not have the amount of wattage needed to run this unit.
I attached an install video for this for you to check out as well. view full answer...
Yes, the Draw-Tite # 41948 hitch fits the Warlock model of the 2019 Ram 1500 Classic. It fits all models that don't already have a factory hitch.
If you also need wiring you can use part # C55774 for both a 7-way and 4-way. Then I recommend an adjustable ball mount like # FA42-00-2600. view full answer...
The Draw Tite hitch part # 75232 is a fit for your 2021 Ram 1500 Classic that does not have a factory hitch and has very high towing capacities as well as is compatible with weight distribution so it would work great for you. I attached an install video for this for you to check out as well. view full answer...
I recommend the Redarc Tow-Pro Liberty Brake Controller # RED24FR for your 2021 Ram 1500 Classic. This will plug and play into the factory wiring on your Ram with the Redarc Plug-and-Play Wiring Harness # 331-TPH-020. You can also place the small control knob where it is most convenient for you to use. The main unit mounts discretely behind the dash for a clean appearance. view full answer...
The ladder rack you want for your 2019 Ram 1500 5-1/2 foot bed is the Truxedo Elevate part # TX96NV which is sliding and is height adjustable. Since it attaches to the top of the bed rail it also allows a tonneau cover to fit as well. For that the BAKFlip G2 part # BAK26207 would be a really great option that fits your truck and with the ladder rack. view full answer...
For your 2020 Ram 1500 Classic and Curt Venturer Brake Controller # C74VV you can simply use the wiring harness # C51458 to connect it.
It will be a simple plug and play with your factory wiring connectors. view full answer...
The K-Source tow mirrors part # KS58BV that fits your 2019 Ram 1500 Classic come with all hardware needed to install on your truck. You wouldn't need any additional brackets or hardware to install them. view full answer...
Emissions testing is basically just a check to make sure you do not have any check engine lights on. A catback system like the MagnaFlow kit part # MF17108 would not cause any check engine lights to come on so it would not cause you to fail emissions. Where it might get interesting is the visual inspection. This dumps the exhaust right before the rear axle but but does have a muffler so it really depends on how strict the place you go to enforces any restrictions on exhaust. Best option... view full answer...
You are going to have to have a front receiver fabricated for your 2023 Ram 1500 Classic Warlock. We do have the Weld-On 2" Receiver # E17 which will aid in the fabrication of a front mount receiver.
Currently the only custom fit front receiver for the Ram 1500 Classic is the Curt # 31374 which will not fit with the Warlock front end. view full answer...
Go To Results